
PoE in audiovisual applications
In AV IP networks, reliability and compatibility are essential. Increasingly, audiovisual equipment is powered via Power over Ethernet (PoE), allowing a single network cable to transmit both data and electrical power. This greatly simplifies installations, especially in complex environments such as theaters, conference centers, or historic buildings.
However, the wide variety of PoE names and standards often causes confusion among AV technicians, integrators, and system designers. What do terms like « PoE+ », « Ultra PoE » or « 4PPoE » really mean? And how do you know if a switch or camera is compatible with your infrastructure?
Official PoE Standards
IEEE 802.3af (PoE)
Introduced in 2003, this first official PoE standard provides up to 15.4 watts of DC power via Cat5 cables, with approximately 12.95 watts usable after cable losses. This was sufficient for early PoE devices such as IP phones and some Wi-Fi access points.
IEEE 802.3at (PoE+)
Published in 2009, PoE+ increased the maximum power to 30 watts, allowing more demanding devices such as PTZ security cameras (Pan, Tilt, Zoom) and new Wi-Fi access points to be powered. PoE+ is backward compatible with the 802.3af standard, meaning a PoE+ switch can also power older PoE devices.
IEEE 802.3bt (PoE++ or 4PPoE)
Approved in 2018, this standard introduces two new types:
-
Type 3 (60 watts)
-
Type 4 (90 watts)
It powers devices that are very power hungry such as LED lighting, interactive displays and even some laptops. PoE++ or 4PPoE uses the four twisted pairs of the network cable to provide more power.
PoE parameter comparison
| IEEE Name | Type 1 | Type 2 | Type 3 | Type 4 |
|---|---|---|---|---|
| Current rating | PoE | PoE+ | PoE++ / 4PPoE | PoE++ |
| Power to PD | 12,95 W | 25,50 W | 51 W | 71,3 W |
| Maximum PSE Power | 15,40 W | 30,0 W | 60 W | 90 W |
| Voltage Range (PSE) | 44–57 V | 50–57 V | 52–57 V | — |
| Voltage Range (PD) | 37–57 V | 42,5–57 V | 41,1–57 V | — |
| Max current | 350 mA | 600 mA/pair | 960 mA/pair | — |
| Cable Resistance | 20 Ω (Cat 3) | 12,5 Ω (Cat 5) | — | — |
| Power Classes | 1–3 | 1–4 or LLDP | 1–6 or LLDP | 1–8 or LLDP |
| Power reduction related to temperature | None | 5°C (2 pairs) | 10°C (4 pairs) | 10°C (prévu) |
| Supported Cabling | Cat 3 & 5 | Cat 5 | — | — |
| Modes | Mode A/B | Mode A/B | Mode A/B / 4 pairs | 4 pairs required |
(Source : Wikipedia)
Why manufacturers use different PoE names
Why manufacturers use different PoE names
Marketing Strategies
To differentiate, manufacturers often use catchy names such as "Ultra PoE" or "High Power PoE", even though these products meet existing IEEE standards.
Compatibility and specifications
Some vendors develop PoE proprietary solutions optimized for their own devices, hence the emergence of terms like « enhanced PoE ».
Innovation and differentiation
Manufacturers can introduce new features before standardization, and give them unique names to highlight their R&D efforts.
Lack of user knowledge
Many end users are not familiar with IEEE standards. Manufacturers therefore use simplified terms to address a non-technical audience, even if those terms are not technically accurate.
Conclusion
Even though the IEEE defines clear PoE standards, manufacturers often use varied names and marketing terms. This can be confusing, but this diversity generally stems from a desire to stand out, to demystify for users, or to fill the gap left by evolving standards.
By understanding the official standards and carefully analyzing the technical specifications, professionals can make more informed choices to meet their network needs.
More Information
More information on our audiovisual solutions
Learn everything about IP networks with the NETGEAR ACADEMY
Our engineers will accompany you free of charge in realizing your audiovisual projects
