Pro AV Technical Guide

NETGEAR Pro AV solutions are specifically designed for IP AV with immediate support for every networked AV solution. Our technical guide will walk you through common procedures for installing our products and AV solutions on IP.

Access a specific procedure:

  • Find the IP address of your switches
  • Engage controller installation
  • Integrating a switch into Engage
  • ProAV firmware update
  • Provision AV profiles with Engage
  • Configure VLAN routing with Engage
  • ProAV Network Topology
  • Configure a stack of switches
  • Stack Removal
  • DHCP reservations with Engage
  • PIM-SM Configuration
  • Configuring access point ports with multiple VLANs
  • Initial configuration of the PR460X
  • Visio templates for M4200, M4250, M4300, M4350, and M4500
NETGEAR AV - How to find the IP address of your switches

Product lines: M4250 | M4300 | M4350

Find the IP address of your switches

In this guide, we will examine how to find the IP address of your managed switches using various methods.

➤ DHCP Lease Verification
o Log in to the DHCP server or router that manages DHCP, then look up the switch's MAC address to see the IP address it received.

➤ Default IP Address
o This method requires assigning a static IP address to your computer. The switch will not be connected to a DHCP server and will use its default IP address.

➤ Console port
To connect via the console port, use a USB-C to USB-A cable to link the computer to the switch. To have the computer recognize the USB port as a console port, install the drivers from the NETGEAR switch support page, then use a program such as Tera Term or PUTTY.

➤ OOB (Out-of-Band)
o This method involves connecting directly to the switch's OOB port and assigning a static IP address to the computer to access the switch.

Download the guide: Find the IP address of your switches

NETGEAR AV line - Engage controller

Product lines: M4250 | M4300 | M4350

Engage controller installation

This guide explains how to install the Engage controller.

We’ll show where to download the Engage controller, how to install it, and how to discover your switch.

There is also a brief overview of the "Devices" tab, where you can see switches added to the controller and those discovered on the network. The "Topology" tab lets you visualize devices and how they are connected. The "Site Settings" tab allows you to configure profiles (VLANs) that will be applied to all managed switches. The "Support" tab lets you download technical support files for devices managed by Engage. And the "Controller Management" tab lets you create multiple sites for different AV networks.

Download the guide: Engage controller installation

NETGEAR AV Line - How to integrate devices

Product lines: M4250 | M4300 | M4350

Integrate a switch into the Engage controller

In this guide, we will see how to integrate a switch into the Engage controller.

There are two methods to integrate a switch into Engage:

➤ Devices discovered
o The Engage controller scans the network for any ProAV switch. Once detected, you can select it and integrate it into Engage.

➤ IP Address
This method is useful if the switch is on a different VLAN and not on the same L2 network. Simply specify the switch IP address to the Engage controller.Download the guide: Integrating a switch into the Engage controller

NETGEAR AV Line - How to update firmware

Product lines: M4250 | M4300 | M4350

Firmware Update

This guide explains how to update firmware on a managed ProAV switch.

Configuration: two switches connected to a firewall (acting as a DHCP server) and a computer with the Engage controller. Two methods are covered:

➤ Via the Engage controller
Firmware update without accessing the switch’s web interface.

➤ Via the ProAV interface
o Use the Engage controller to access the switch interface and perform the update via the "Maintenance" menu.

Download the guide: Firmware update

NETGEAR AV - Different Deployment Types

Product lines: M4250 | M4300 | M4350

Provision AV profiles via Engage

Please consult the guides below for the desired ProAV profile

Basic configuration: two switches connected to a firewall and a computer with Engage.

➤ Dante Guide
o Part 1: default VLAN configuration with the "Dante" profile.
o Part 2: configuration of a separate VLAN with the same profile.

Download the guide: Dante

➤ AES67 AV over IP with transparent PTP clock
o Change VLAN 1 profile to "AES67 Audio" via Engage.
o Enable PTP residency on each switch.

Download the guide: AES67 Guide

➤ Audio and Video over IP
o Create a VLAN with the "Video" profile, select the ports.
o Create a VLAN with the "Audio Dante" profile, select the ports.

Download the guide: Audio & Video on IP Guide

➤ Audio over IP and lighting
o Create a VLAN with the “Audio Q-SYS” profile.
o Create a VLAN with the “Lighting” profile.

Download the guide: Audio on IP and lighting

➤ AVB Configuration
o Part 1: default VLAN configuration with the "AVB" profile.
o Part 2: creation of a separate VLAN with the "AVB" profile.

Download the guide: AVB Configuration Guide

➤ Multiple VLANs for different types of IP AV
o A: Create a VLAN with the “Audio Q-SYS” profile and select the port.
o B: Create a VLAN with the “Video” profile and select the port.
o C: Create a VLAN with the “Lighting” profile and select the port.

Download the guide: Multiple VLANs for different types of AV over IP

NETGEAR AV - How to Configure Multiple VLANs

Product lines: M4250 | M4300 | M4350

Configure VLAN routing via Engage

This guide explains VLAN routing configuration on a ProAV switch

Configuration: an M4300-8X8F as the central switch and two M4250-8G2XF-PoE+. Creation of two VLANs (10 and 20) on the three switches. The central switch is configured with routing, IP addresses, and DHCP pools.

Adding routes on the firewall for Internet routing via the central switch.

Download the guide: Configuring VLAN routing via Engage

NETGEAR AV - Network Topology

Product lines: M4250 | M4300 | M4350

AV Network Topology

This guide presents topologies suited for a ProAV network.

NETGEAR PoE PortWe will review the different types of topologies and how they can affect your network. A network topology consists of “nodes,” i.e., the devices on your network, such as routers, switches, and access points. It provides a physical and logical organization of how traffic flows through your network.

Download the guide: ProAV network topology

NETGEAR AV line - How to configure stacking on M4300

Product lines: M4250 | M4300 | M4350

Configure switch stacking

How to stack M4300 switches and recommendations for using audio-video on a stack.

This guide explains the necessary configuration to stack your switches

Ensure that the firmware of the switches is updated to the latest available version. We will configure each switch with a priority to indicate which is the “Management” switch and which is the “Stack Member”.

The ports on both switches must be configured in “Stacking” mode before connecting the cables. Once the switches are configured, you will power them off, connect the stacking cables, and power them on in order, with the “Management” switch starting before the “Stack Member”.

NOTE: The stacking configuration will not be erased when restoring factory settings. To remove the stacking configuration, please refer to the guide “How to Disassemble a Stack”.

Download the guide: Configuring switch stacking

NETGEAR AV Line - How to remove stacking from switches

Product lines: M4250 | M4300 | M4350

Configuration to disassemble a stack of switches

How to remove stacking configuration to switch to standalone mode.

Stacking configuration will not be erased when restoring factory settings, nor when using the “clear config” command via the CLI. This guide explains how to delete the configuration via the CLI and how to reconfigure the switch ports from “Stack” to “Ethernet”.

Download the guide: Disassembling a stack of switches

NETGEAR AV line - How to configure DHCP reservations

Product lines: M4250 | M4300 | M4350

Configure DHCP reservations via Engage

This guide explains how to configure DHCP reservations using the Engage controller.

DHCP reservations allow you to configure the DHCP server to assign a specific address based on the MAC address of the device requesting an address. DHCP reservations can only be configured on the switch if it is the DHCP server.

Download the guide: DHCP Reservation Configuration via Engage

NETGEAR AV line - Configure PIM Sparse Mode

Product lines: M4250 | M4300 | M4350

PIM-SM Configuration

This guide explains how to configure PIM-SM.

In this configuration, we will see the PIM-SM (Sparse Mode) configuration on the central switch, then the configuration of the additional switches in your network. This guide explains how to create VLANs via the AV interface on the central and leaf switches, and the configuration differences between the central switch and the leaf switches.

Download the guide: PIM-SM Configuration

NETGEAR AV Line - Configure Access Point ports

Product lines: M4250 | M4300 | M4350

Configure Access Point ports with multiple VLANs

This guide explains how to configure access point ports and create SSIDs on separate VLANs.

In this guide, we have VLANs 10 and 20; we will modify the VLANs and configure the ports to which an access point is connected.

Next, we’ll connect to the access point, create the SSIDs, and configure them for each VLAN.

Download the guide: Access Point Configuration with Multiple VLANs

Product Lines: PR460X

Initial configuration for PR460X

This guide explains the initial configuration of the PR460X router and how to modify the LAN subnet.

In this guide, we will cover the factory-reset configuration of the router and how to set up the LAN subnet.

Download the guide: Initial configuration PR460X

NETGEAR M4200, M4250, M4300, M4350 and M4500 Visio Stencils

Product lines: M4200, M4250, M4300, M4350, M4500

Visio Stencils for M4200, M4250, M4300, M4350, and M4500 switches

This guide provides links to Visio Stencils for NETGEAR AV switches.

Download Visio Stencils for M4200, M4250, M4300, M4350, and M4500

Download the guide: NETGEAR AV Visio Stencils

More Information

More information on our audiovisual solutions

NETGEAR AV SOLUTIONS

Learn everything about IP networks with the NETGEAR ACADEMY

NETGEAR ACADEMY

Our engineers will accompany you free of charge in realizing your audiovisual projects

CONTACT THE PROAV TEAM